PosDelta D45, Programmer'S Manual

Page: 20 / 31

33
．
GS
（
A pL pH n m
[Name] Hexadecimal Dumping mode
[Format] ASCII GS ( A pL pH n m
Hex 1D 28 41 pL pH n m
Decimal 29 40 65 pL pH n m
[Range] (pL+pH x256) = 2 (pL=2,pH=0)
n=0
， 48
m=1 ， 49
34
．①
GS V m
②
GS V m n
[Name] Select cut mode and cut paper
[Format] ① ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
② ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range]
①
m = 0
，
48
，
1
，
49
②
m =65
，
66
，
0 ≤ n ≤ 255
[Description] Selects a mode for cutting paper and executes paper cutting. The value of m selects the
mode as follows:
M Cutting Mode
0, 48 Full cut
1, 49 Partial cut
65,66 Feed paper (cutting po [ n × (vertical motion unit)]),
and cut the paper partially (one point left uncut).
• This command is effective only processed at the beginning of a line.
• When m=0, 48, 1, 49, printer cuts paper directly.
• When n=65,66, printer feeds paper [cutting po [
n × (vertical motion unit)]] and
cuts paper partially.
• Feed paper is measured by vertical motion unit.
35
．
GS a n
[Name] Enable/Disable Automatic Status Back (ASB)
[Format] ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
[Range] 0 ≤ n ≤ 255
[Description] Enables or disables ASB and specifies the status items to include, by using n as