1
0c
12
Paper roll near-end sensor: paper near
end.
4
0
00
0
Not used. Fixed to Off.
5
，
6 ---
---
Undefined.
7
0
00
0
Not used. Fixed to Off.
Drawer kick-out status (
n
= 2, 50):
Bit 0/1 Hex
Decimal Status
0
0
00
0
Drawer kick-out connector pin 3 is LOW.
1
01
1
Drawer kick-out connector pin 3 is HIGH.
1-3
---
---
Undefined.
4
0
00
0
Not used. Fixed to Off.
5
，
6 ---
---
Undefined.
7
0
00
0
Not used. Fixed to Off.
[Reference] DLE EOT
，
GS a
37
．
GS z 0 t1 t2
[Name]
Set online recovery wait time
[Format]
ASCII
GS
z
0
t1
t2
Hex
1D
7A
30
t1
t2
Decimal
29
122
48
t1
t2
[Range]
0
≤
t1
≤
255
0
≤
t2
≤
255
[Description] This command sets the paper wait time to
t1
x 0.5 seconds and the recovery
confirmation time to
t2
x 0.5 seconds.
• t1 = 0
Set to recovery confirmation status when new paper roll is installed.
• t2 = 0
Cancel the recovery confirmation time.
[Details]
• Shortage of paper makes printer off-line. When new paper roll is installed and after
the specified recovery wait time, the printer will be on-line again.
• The paper wait time is within
t1
x 0.5 seconds from the time the printer finishes
loading the paper. During this time, Paper can be fed by pressing the FEED button and
the printer can be set on-line by using the
DLE ENQ
command. After the paper wait
time, printer is on the recovery confirmation status.
• During the paper wait time, the time of feeding paper by pressing FEED button is not
counted in the paper wait time. Loading the paper or paper shortage is sensed, printer
waits the paper wait time (
t1
x 0.5 seconds) and recovery confirmation time (
t2
x 0.5
seconds) to return back on-line.
• The recovery confirmation time is within
t2
x 0.5 seconds of the end of the paper wait
time. During this time, the PAPER LED flashes. However, the printer can be on-line by
pressing the PAPER FEED button. The printer will be on-line when the recovery
confirmation time ends or by using the
DLE ENQ 0
command.
• During the recovery confirmation time, paper cannot be fed by pressing the FEED
button.
• When t2=0 and PAPER LED flashes, the printer can be on-line by using the
DLE
ENQ 0
command or pressing the FEED button.
Summary of Contents for D45
Page 1: ...D45 IMPRESORA DE IMPACTO ...
