PosDelta D45, Programmer'S Manual

Page: 23 / 31

• During the online recovery wait time, if the paper sensor finds out the paper near-end
status, printer returns to the status of waiting paper load.
[Default] t1 = 0 ， t2 = 0
[Reference] DLE EOT ， DLE ENQ ， GS a
38
．
FS ! n
[Name] Set print mode(s) for Kanji characters
[Format] ASCII FS ! n
Hex 1C 21 n
Decimal 28 33 n
[Range] 0 ≤ n ≤ 255
[Description] Sets the print mode for Kanji characters, using n as follows:
Bit 0/1 Hex Decimal Function
0, 1 --- --- Undefined.
2
0 00 0 Double-width mode is OFF.
1 04 4 Double-width mode is ON.
3 0 00 0 Double-height mode is OFF.
1 08 8 Double-height mode is ON.
4-6 -- -- Undefined.
7
0 00 0 Underline mode is OFF.
1 80 128 Underline mode is ON.
[Details] • When both double-width and double-height modes are set (including right- and left-side
character spacing), quadruple-size characters are printed.
• The printer can underline all characters (including right- and left-side character spacing),
but cannot underline the space set by
HT
.
[Default] n = 0
[Reference] FS -
，
FS W
39
．
FS &
[Name] Select Kanji characters mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Select Kanji characters mode
[Details]
• When Kanji characters mode is selected, the printer checks to find out whether the
code is Kanji character or not. If it is, the 1st and 2nd bytes will be processed.
• For Kanji characters, the 1st byte is processed first and the 2nd byte after.
• Kanji characters mode is set when printer is power on.
[Reference] FS .
，
FS C
40
．
FS - n
[Name] Turn underline mode on/off for Kanji characters
[Format ASCII FS - n