background image

 

- ii -

Safety 

IMPORTANT SAFETY INSTRUCTIONS 

1.  To disconnect the machine from the electrical power supply, turn off the 

power switch and remove the power cord plug from the wall socket. The 
wall socket must be easily accessible and in close proximity to the 
machine. 

2.  Read these instructions carefully. Save these instructions for future 

reference. 

3.  Follow all warnings and instructions marked on the product. 
4.  Do not use this product near water. 
5.  Do not place this product on an unstable cart, stand, or table. The product 

may fall, causing serious damage to the product. 

6.  Slots and openings in the cabinet and the back or bottom are provided for 

ventilation to ensure reliable operation of the product and to protect it from 
overheating. These openings must not be blocked or covered. The 
openings should never be blocked by placing the product on a bed, sofa, 
rug, or other similar surface. This product should never be placed near or 
over a radiator or heat register or in a built-in installation unless proper 
ventilation is provided. 

7.  This product should be operated from the type of power indicated on the 

marking label. If you are not sure of the type of power available, consult 
your dealer or local power company. 

8.  Do not allow anything to rest on the power cord. Do not locate this product 

where persons will walk on the cord. 

9.  Never push objects of any kind into this product through cabinet slots as 

they may touch dangerous voltage points or short out parts that could result 
in a fire or electric shock. Never spill liquid of any kind on the product. 

 

CE MARK   

This device complies with the requirements of the EEC directive 
2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC 
“Low Voltage Directive”. 

 

FCC 

This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions: 
(1) This device may not cause harmful interference.   
(2) This device must accept any interference received, including interference that 
may cause undesired operation. 

Summary of Contents for EVO-RD1-VFD









































Reviews: