- 14 -
Note:
1. While using command “ESC Q A” or “ESC Q B”, other commands cannot be used
except when using command “CLR” or “CAN” to change operating mode.
2. When using command “ESC Q D”, the upper line message will scroll continuously
until a new command is received, it will then clear the upper line and move the
cursor to the upper left-end position.
3. Select the international Character set (20h – 7Fh) by command “ESC f
n
”.
Parameter “n”
Parameter “n”
Character
Hex
International
Character Set
Character
Hex
International
Character Set
‘A’ 41h
U.S.A.
‘W’ 57h
Sweden
‘G’ 47h
Germany
‘D’ 44h
Denmark
I
’I’ 49h
Italy
‘E’ 45h
Denmark
II
‘J’ 4Ah
Japan
‘L’ 4Ch
Slavonic
‘U’ 55h
U.K.
‘R’ 52h
Russia
‘F’ 46h
France
‘S’ 53h
Spain
‘N’ 4Eh
Norway
4. Select character code table (80H-FFH) by command “ESC c
n
”.
Parameter “n”
Character
Hex
character Code Table
‘A’
41h Compliance with ASCII code (CP-437)
‘J’
4Ah Compliance with JIS code (Katakana)
‘L’
4Ch Compliance with Slawie code
‘R’
52h Compliance with RUSSIA code
‘M’ 4Dh
CP-850
(Multilingual)
‘P’
50h CP-858 (Multi Euro Symbol)
‘p’ 70h
CP-860
(Portuguese)
‘F’ 46h
CP-863
(Canadian-French)
‘N’ 4Eh
CP-865
(Nordic)
‘u’ 75h
CP-852
(Hungary)
‘H’ 48h
CP-862
(Hebrew)
‘C’ 43h
CP-866
(Cyrillic)
‘G’ 47h
Greek
‘c’ 63h
Windows-1251
(Cyrillic)
‘W’
57h Windows-1252 (West European Latin)
‘h’ 68h
Windows-1255
(Hebrew)
‘B’ 42h
Windows-1257
(Baltic)
‘g’ 67h
Windows-1253
(Greek)
