Page 35
V 1.3 – February 2016
U s e r I n s t r u c t i o n M a n u a l
Setting up Master & Slave
• To connect a master Ultravap Mistral to a slave, simply connect units via the CAN to
RS232.
• Then link the RS232 and CAN on the slave with the double ended cable.
Master & Slave
Connecting Multiple Ultravap Mistrals
If additional Ultravap Mistrals are being used (3 or more), connect the master CAN to the
slave RS232 port to the first slave and repeat this for subsequent slaves. On the last slave,
link the CAN and RS232 with the short cable.
Note:
The RS232 port is left open on the master so that it can be controlled by remote
communications via a PC.
CAN
RS232
CAN
RS232
CAN
RS232
End Slave
Slave
Master
Master
End Slave
