Page 48
V 1.3 – February 2016
U s e r I n s t r u c t i o n M a n u a l
Changing Mains Protection Fuse
To replace mains protection fuse, in the event of failure, carry out the following procedure:
• Switch off and disconnect from mains power supply.
• Pinch tabs together (can use small flat-bladed screwdriver) to open fuse cover on IEC mains
power inlet.
• Replace defective fuse – ensure replacement fuse is of the correct rating – refer to
Specifications
and System Requirements.
• Close fuse drawer and cover.
• Reconnect to mains power supply, switch on and test.
Pinch tabs toward
each other to open
cover on IEC
power inlet
Remove drawer
to reveal fuse
