Portwell WADE-8075, User Manual

Page: 53 / 61

BIOS Setup Information
WADE-8075 / WADE-8076 User’s Manual 4-22
Bootup Num-Lock State
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
Choices: On, Off.
Quiet Boot
This BIOS feature determines if the BIOS should hide the normal POST messages
with the motherboard or system manufacturer's full-screen logo. When it is enabled,
the BIOS will display the full-screen logo during the boot-up sequence, hiding
normal POST messages.
When it is disabled, the BIOS will display the normal POST messages, instead of the
full-screen logo.
Please note that enabling this BIOS feature often adds 2-3 seconds of delay to the
booting sequence. This delay ensures that the logo is displayed for a sufficient
amount of time. Therefore, it is recommended that you disable this BIOS feature for a
faster boot-up time.
Choices: Disabled, Enabled.
Fast Boot
Enabling this setting will cause the BIOS power-on self test routine to skip some of its
tests during boot up for faster system boot.
Choices: Disabled, Enabled.
GateA20 Active
Choices: Upon Request, Always.
Option ROM Messages
This item is used to determine the display mode when an optional ROM is initialized
during POST. When set to [Force BIOS], the display mode used by AMI BIOS is used.
Select [Keep Current] if you want to use the display mode of optional ROM.
Choices: Force BIOS, Keep Current.