Portwell WADE-8075, User Manual

Page: 22 / 61

System Installation
WADE-8075 / WADE-8076 User’s Manual 3-1
Chapter 3
System Installation
This chapter provides you with instructions to set up your system. The additional
information is enclosed to help you set up onboard PCI device and handle Watch
Dog Timer (WDT) and operation of GPIO in software programming.
3.1 Intel Atom D525 CPU
- Intel® Atom D525 Processor (1M Cache, 1.8GHz, Max TDP 13 Watts)
3.2 Main Memory
WADE-8075 provide 2 x 204pin SO-DIMM sockets which supports single channel 800
DDR3-SDRAM as main memory, Non-ECC (Error Checking and Correcting),
non-register functions. The maximum memory can be up to 4GB. Memory clock and
related settings can be detected by BIOS via SPD interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be set to either one double-sided DIMM in one DIMM
socket or two single-sided SO-DIMM in both sockets.
Beware of the connection and lock integrity from memory module to socket. Inserting
improperly it will affect the system reliability.
Before locking, make sure that all modules have been fully inserted into the card
slots.
Note:
To insure the system stability, please do not change any of DRAM parameters in
BIOS setup to modify system the performance without acquired technical
information.