Portwell WADE-8075, User Manual

Page: 28 / 61

System Installation
WADE-8075 / WADE-8076 User’s Manual 3-7
outportb(Superio2_Addr,
Addr2);
delay(2);
outportb(Superio1, Value2);
#ifdef DEBUG
d2 = inportb(Superi1);
printf("\nWrite %x to CR%x, read back is:%x",Value2,Addr2,d2);
#endif /*DEBUG*/
delay(2);
}
unsigned char Get_CFG2(unsigned char Addr2)
{
unsigned char d2;
outportb(Superio2_Addr, Addr2);
delay(2);
d2 = inportb(Superi1);
#ifdef DEBUG
printf("\nGet data %x from CR%x",d2,Addr2);
#endif /*DEBUG*/
delay(2);
return(d2);
}
int main(void)
{
unsigned char d2;
unsigned char LD0830_S, LD08E0_S, LD08E1_S, LD08E2_S, LD08E3_S,
LD08E4_S, LD08E5_S, LD08E6_S, LD08E7_S;
unsigned char LD0930_S, LD09E0_S, LD09E4_S, LD09E5_S, LD09E6_S,
LD09E7_S;
unsigned char Test_Group_1, Test_Group_2;
printf("\n------------------------------------------------------------------------");
printf("\n- PEB-2770/2780 GPIO TEST Program R1.0 -");
printf("\n------------------------------------------------------------------------");
printf("\n Please short the following pins with 2.00mm-pitched jumper on
J13");
printf("\n P.S: SIO: W83627UHG, Winbond");
printf("\n GP24(J16 PIN 1)----GP51(J16 PIN 2)");
printf("\n GP23(J16 PIN 3)----GP52(J16 PIN 4)");
printf("\n GP22(J16 PIN 5)----GP53(J16 PIN 6)");
printf("\n GP50(J16 PIN 7)----GP54(J16 PIN 8)");
printf("\n GND (J16 PIN10)****VCC (J16 PIN 9)");