Portwell WADE-8075, User Manual

Page: 29 / 61

System Installation
WADE-8075 / WADE-8076 User’s Manual 3-8
printf("\n");
printf("\n GP55(J15 PIN 1)----GP61(J15 PIN 2)");
printf("\n GP56(J15 PIN 3)----GP62(J15 PIN 4)");
printf("\n GP57(J15 PIN 5)----GP63(J15 PIN 6)");
printf("\n GP60(J15 PIN 7)----GP64(J15 PIN 8)");
printf("\n GND (J15 PIN10)****VCC (J15 PIN 9)");
printf("\n\n Starting...");
enter_Superio2_CFG(); // 87 87
/* CR2A B7 = 1 selet GPIO Port 1*/
d2 = Get_CFG2(0x2A);
d2 = (d2 & 0x7F) | 0x80;
Set_CFG2(0x2A, d2);
/* IO test loop 1 */
/* Set GPIO Port 5 Enable */
Set_CFG2(0x07, 0x08); /* Select logic device 08*/
LD0830_S = Get_CFG2(0x30); /* Backup the value */
Set_CFG2(0x30, 0x06); /* Enable GPIO Port 5 and GPIO Port
6*/
Set_CFG2(0x07, 0x09); /* Select logic device 09*/
LD0930_S = Get_CFG2(0x30); /* Backup the value */
Set_CFG2(0x30, 0x02); /* Enable GPIO Port 2*/
//--------------------------------------------------------------------------------------------------------
// GPIO24->51
// GPIO23->52
// GPIO22->53
// GPIO50->54
//
// GPIO55->61
// GPIO56->62
// GPIO57->63
// GPIO60->64
//--------------------------------------------------------------------------------------------------------
/* Set GPIO Port 2 */
Set_CFG2(0x07, 0x09);
LD09E4_S = Get_CFG2(0xE4); /* Backup the value */
Set_CFG2(0xE4, (LD09E4_S & 0xE3) ); /* Set the GPIO 22, 23, 24 to
output */
/* Set GPIO Port 5 of Superio2 Enable */
Set_CFG2(0x07, 0x08); /* Select logic device 08*/
LD09E0_S = Get_CFG2(0xE0); /* Backup the value */