Hardware Configuration
ROBO-8713BVG2 User’s Manual
2-7
J17: ATX Power Control Connector
PIN No.
Signal Description
1
ATX Power Good Signal (PW-OK)
2
ATX 5V Stand-by (5VSB)
3
ATX Power On Control (PS-ON)
4
Ground
J18/J24: Primary/Secondary SATA Connector
PIN No.
Signal Description
1 Ground
2
(SATATXP)
3 SATATX-
(SATATXN)
4 Ground
5 SATARX-
(SATARXN)
6
(SATARXP)
7 Ground
J19: General Purpose I/O Connector
PIN No.
Signal Description
1
General Purpose I/O Port 0 (GPIO0)
2
General Purpose I/O Port 1 (GPIO1)
3
General Purpose I/O Port 2 (GPIO2)
4
General Purpose I/O Port 3 (GPIO3)
5 Ground
6
General Purpose I/O Port 4 (GPIO4)
7
General Purpose I/O Port 5 (GPIO5)
8
General Purpose I/O Port 6 (GPIO6)
9
General Purpose I/O Port 7 (GPIO7)
10 +5V
Note:
All General Purpose I/O ports can only apply to standard TTL ± 5% signal level
(0V/5V), and each source sink capacity up to 12mA.
