BIOS Setup Information
ROBO-8713BVG2 User’s Manual
4-21
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU
will be shut off.
The choice: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20 Min, 30 Min, 40 Min, 1
Hour.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The choice: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min,
10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min.
Soft-Off by PWR-BTTN
This item allows users to set the time to remove the power after the power button is
pressed.
The choice: Instant-Off, Delay 4 Sec.
PWRON After PWR-Fail
This item allows user to configure the power status of using ATX power supply after
a serious power loss occurs.
On
System automatically restores Power back
Off
System stays at Power-Off
CPU THRM-Throttling
When the CPU temperature reaches the preset standard. The CPU usage will be
reduced to a selected level to avoid overheating.
The choice: 75.5%, 50.0%, 25.0%.
Power On by Ring/LAN
When select “Enabled”, a system that is at soft-off mode will be alert to Wake-On-
Modem or Wake-On LAN.
The choice: Enabled, Disabled.
Wake-Up By Onboard LAN
This option can be enabled to support Wake Up by on-board LAN.
The choice: Disabled, Enabled.
