BIOS Setup Information
ROBO-8713BVG2 User’s Manual
4-13
4.7 Integrated
Peripherals
Phoenix- AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
f
OnChip IDE Device
[Press Enter]
f
Onboard Device
[Press Enter]
f
Super IO Device
[Press Enter]
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix- AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
IDE HDD Block Mode
[Enabled]
IDE DMA transfer access
[Enabled]
On-Chip Primary PCI IDE
[Enabled]
IDE Primary Master PIO
[Auto]
IDE Primary Slave PIO
[Auto]
IDE Primary Master UDMA
[Auto]
IDE Primary Slave UDMA
[Auto]
On-Chip Secondary PCI IDE
[Enabled]
IDE Secondary Master PIO
[Auto]
IDE Secondary Slave PIO
[Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA
[Auto]
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
[Disabled]
X Serial ATA Port0 Mode
[Primary Master]
Serial ATA Port1 Mode
[Primary Slave]
Menu Level
f
If your IDE hard drive
supports block mode select
Enabled for automatic
detection of the optimal
number of block
read/writes per sector the
drive can support.
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Note:
If user changes On Chip Serial ATA default to become “Enhance”, user will perceive
that shadow item could be selectable; The SATA HDD device information will be
appeared on Standard CMOS Features configuration.
