background image

PNA-2413

Ordering Guide

Specification

Processor

Flexible processor support ranging 
from the Intel

®

 Celeron

®

 processor at 

566 MHz to the Pentium

®

 III processor 

at 866 MHz with support for 
66/100/133 MHz Processor System 
Bus (PSB) 

Memory

- Support for 100 and 133MHz SDRAM 
- 512 MB SODIMM maximum memory 

I/O Ports

- 3 Intel® 82559ER Ethernet LAN       
   connect  interface
- Two USB ports
- One RS-232

Storage Device

- One 3.5" Hard disk Bay
- Embedded DOM socket

PCI Expansion

One PCI expansion slot

LCD Panel

 

 2 x 16 characters EZIO-100 module   
LCD panel

LEDs

 

 8 user self defined programming LEDs 

Power

 External 70W AC/DC power adapter

Operating Environment 

 - Tempature: 5 to 45˚C
 - Humidity: 20% to 90% RH

Storage Environment

 

 - Tempature: 5 to 70˚C
 - Humidity : 5% to 95% RH

Dimension 

 144(W) x 260(D) x 88(H)mm
 5.7"(W) x 10.2"(W) x 3.5"(H)

Safety

 CE/FCC

 

PNA-2413-0000

 2U communication appliance server with three LANs, one PCI expansion slot  
 and EZIO (CPU and RAM not included)

Designed based on Intel

®

 Proof of 

concept architecture platform

Three Embedded Intel

®

 10/100 

Ethernet for easy I/O configuration

Embedded storage capability design 
for DOM usage

16 x 2 characters EZIO-100 LCD 
panel module makes the installation 
and maintenance easier and more 
efficient

Tailor-made redirect to console BIOS 
allows users to operate system via a 
com port

Both desktop and Rack-mount form 
factor with good system ventilation 
design

3 units stacked side-by-side fit a 19" 
2U rack

One PCI expansion slot

One SODIMM socket

One optional VGA output

Highlights

2U Communication Appliance Server with Three LANs and 

One PCI Expansion Slot

PNA-1810

EZIO-100 kit

Summary of Contents for PNA-2413

























Reviews: