,-,((
"
Send Carriage Return
Enabled this support if the target terminal has more than 80 columns OR Does not
wrap lines that exceed terminal width.
Options: Disabled, Enabled.
Redirection After BIOS POST
Disabled: Turns off the redirection after POST. Boot Loader: Redirection is active
during POST and during Boot Loader. Always: Redirection is always active. (Some
OSs may not work if set to Always).
Options: Disabled, Boot Loader, Always.
USB Configuration
Configure the USB support.
BIOS SETUP UTILITY
Advanced
USB Configuration
Module Version – 2.22.5-6.4
USB Devices Enabled:
None
Legacy USB Support
[Enabled]
USB 2.0 Controller Mode
[HiSpeed]
USB Beep Message
[Disabled]
!
USB Mass Storage Device Configuration
Enables support for legacy
USB. AUTO option
disables legacy support no
USB devices are
connected.
Select
Screen
Select
Item
Change
Option
F1 General
Help
F10
Save and Exit
ESC Exit
V02.33 (C) Copyright 1985-2002, American Megatrends, Inc.
Legacy USB Support
Enabled support for legacy USB. AUTO option disabled legacy support if no USB
devices are connected.
Options: Disabled, Enabled, Auto.
USB 2.0 Controller Mode
Configures the USB 2.0 controller in HiSpeed (480Mbps) or FullSpeed (12Mbps).
Options: FullSpeed, HiSpeed.
Summary of Contents for PEB-7710VLA
Page 10: ......
Page 32: ...in eax dx...
