,-,((
!!
""'
To install your PEB-7710VLA into a standard chassis or proprietary environment,
you need to perform the following:
Step 1: Check all jumpers setting on proper position
Step 2: Install and configure CPU and memory module on right position
Step 3: Place PEB-7710VLA into the dedicated position in your system
Step 4: Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that your SBC is properly inserted and fixed by mechanism.
Otherwise, the system might be unstable or do not work due to bad contact of
golden finger and PCI-bus slot.
Intel 852 GME chipset is a new chipset that a few old operating systems might not be
able to recognize. To overcome this compatibility issue, for Windows Operating
Systems such as Windows-95/98/98SE/2000, please install INF Chipset Component
driver before any of other Drivers are installed.
You can find very easily the INF chipset component driver in \Chipset\Intel\INF
directory of PEB-7710VLA CD-title. Please execute “infinst_autol.exe” to start
installation.
!!
Intel 852 GME chipset is the result of new design approach to optimize the shared
memory architecture while maintaining the cost benefits of integration through
Direct AGP and Dynamic Video Memory Technology.
With no additional video adaptor, this onboard video will be the system display
output. However, system will automatically switch to off-board video adaptor if
there is any. In this case, onboard 852 GME graphic features will be disabled.
There is no way to disable this onboard video function, unless one off-board PCI
video card is applied onto the backplane. n this case, the off-board video card shall
be picked up first based on the default BIOS setup (Initial Display First) in
“Integrated Peripheral” Setup Menu.
Summary of Contents for PEB-7710VLA
Page 10: ......
Page 32: ...in eax dx...
