Award BIOS Setup
50
USB Keyboard Support:
Options Enabled, Disabled.
Select “Enabled” if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
USB Mouse Support:
Options Enabled, Disabled.
Select “Enabled” if your system contains a Universal Serial Bus (USB)
controller and you have a USB mouse.
AC97 Audio:
Options Auto, Disabled.
This item allows you to auto or disable to support AC97 Audio.
Onboard LAN Device1 / 2:
Options Enabled, Disabled.
Select “Enabled” if your system has a LAN device installed on the system
board and you wish to use it.
Onboard I/O Chip Setup:
Onboard I/O Chip Setup
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
X RxD, TxD Active
X IR Transmission Delay
X UR2 Duplex Mode
X Use IR Pins
Onboard Parallel Port
Parallel Port Mode
X EPP Mode Select
X ECP Mode Use DMA
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Hi, Lo
Enabled
Half
IR-Rx2Tx2
378/IRQ7
SPP
EPP1.7
3
Item Help
____________________________
Menu Level
¾
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
Onboard FDC Controller:
Options Enabled, Disabled.
Select “Enabled” if your system has a floppy disk controller (FDC) installed
on the system board and you wish to use it. If you install and-in FDC or the
system has no floppy drive, select Disabled in this field.
Onboard Serial Port 1 / Port 2:
Options 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4,
2F8/IRQ3, Disabled and Auto.
Select an address and corresponding interrupt for the first and second serial
ports.
Summary of Contents for PEB-7702G2A
Page 2: ......
Page 6: ...iv...
Page 20: ...Installations 14 2 2 Board Layout Jumper Connector Location...
Page 24: ...Installations 18 2 4 Connector s Description Connector Location...
