Award BIOS Setup
49
IDE Primary / Secondary Master / Slave PIO:
Options Auto, Mode 0,
Mode 1, Mode 2, Mode 3 and Mode 4.
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode
(0-4) for each of the four IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased performance.
In Auto mode, the system automatically determines the best mode for each
device.
IDE Primary / Secondary Master / Slave UDMA:
Options Auto, Disabled.
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver (Windows
95 OSR2 or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA/33, select “Auto” to enable BIOS
support.
IDE HDD Block Mode:
Options Enabled, Disabled
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block read/writes per sector the drive can support.
Onboard PCI Device Setup:
Onboard PCI Device Setup
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
Onboard LAN Device 1
Onboard LAN Device 2
Enabled
Enabled
Auto
Disabled
Auto
Enabled
Enabled
Item Help
____________________________
Menu Level
¾
↑↓→←
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
USB / USB 2.0 Controller:
Options Enabled, Disabled.
Select “Enabled” if your system contains a Universal Serial Bus (USB) / USB
2.0 controller and you have USB peripherals.
Summary of Contents for PEB-7702G2A
Page 2: ......
Page 6: ...iv...
Page 20: ...Installations 14 2 2 Board Layout Jumper Connector Location...
Page 24: ...Installations 18 2 4 Connector s Description Connector Location...
