BIOS Setup Information
PEB-4700 User’s Manual
4-20
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11 and NA.
Suspend Mode
When “Enabled” and after the set time of system inactivity. All devices except the
CPU will be shut off.
The choice: Disabled, 1, 2, 4, 8, 12, 20, 30, 40 Min and 1Hour.
HDD Power Down
When “Enabled” and after the set time of system inactivity, the hard disk drive will
be powered down while all other devices remain active.
The choice: Disabled, 1~15Min.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
The choice: Delay 4 Sec, Instant-Off.
CPU THER-Throttling
Select the CPU THRM-Throttling rate.
The choice: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0% and 87.5%.
Wake-Up by PCI Card
An input signal from PME on the PCI card awakens the system from a soft off state.
The choice: Enabled, Disabled.
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.
The choice: Enabled, Disabled.
Resume by Alarm
When “Enabled”, your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
The choice: Enabled, Disabled.
