BIOS Setup Information
PEB-4700 User’s Manual
4-7
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled---Enable quick POST
Disabled--- Normal POST
USB Flash Disk Type
It allows you to select the type of USB flash disk.
The choice: Auto, Floppy, HDD.
First / Second / Third Boot Device
The BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The choice: Floppy, LS/ZIP, HDD, SCSI, CDROM, LAN and Disabled.
Boot Other Device
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the first, second, and third
boot devices.
The choice: Enabled, Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments.
The choice: Enabled, Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled, Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The choice: On, Off.
