BIOS Setup Information
PEB-4700 User’s Manual
4-8
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal---A pin in the keyboard controller controls GateA20.
Fast---Lets chipset control GateA20.
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When enabled,
the typematic rate and typematic delay can be selected.
The choice: Enabled, Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key down.
The choice: 6, 8, 10, 12, 15, 20, 24 and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750 and 1000.
Security Option
Select whether the password is required every time the system boots or only when
you enter setup.
System---The system will not boot and access to Setup will be denied if the correct
password is not entered at the prompt.
Setup---The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt.
Note:
To disable security, select PASSWORD SETTING at Main Menu and then you will be
asked to enter password. Do not type anything and just press <Enter>, it will disable
security. Once the security is disabled, the system will boot and you can enter Setup
freely.
OS Select For DRAM > 64MB
Select the operating system that is running with greater than 64MB of RAM on the
system.
The choice: Non-OS2, OS2.
