System Installation
PEB-4700 User’s Manual
3-2
3.4
I/O Shield Connector
The board is equipped with an I/O panel. Please use the appropriate I/O shield
(Figure 3-1).
Figure 3-1 I/O back panel layout
3.5 Power-On/Off
(Remote)
The board has a single 20-pins connector for ATX power supplies. For ATX power
supplies that support the Remote On/Off feature, this should be connected to the
systems front panel for system Power On/Off button. The systems power On/Off
button should be a momentary button that is normally open.
The board has been designed with “Soft Off" functions. You can turn off the system
from one of two sources: The first is the front panel Power On/Off the button, and
the other is the "Soft Off" function (coming from the M/B
onboard circuit
controller) that can be controlled by the operating system.
