HYDRAULIC POWER UNIT G-18S10-54-W
OPERATION MANUAL
18
5
Transport, assembly and dismantling
The machine must be disconnected from the hydraulic tools for transport. The hydraulic unit must be switched off and
depressurized for this purpose. Then the couplings on the hydraulic hoses can be detached. Allow the hydraulic unit to cool before
transport. Disconnect the ground terminal from the starter battery. Finally, the machine can be transported fully assembled
without any disassembly.
The Hydraulic Power Unit is equipped with a transport handle and two wheels. The hydraulic unit can be pushed to the operation
site using these.
1.
Flip the transport handle up and lock it in the upper position.
2.
Lift the Hydraulic Power Unit slightly and push the hydraulic unit.
3.
Flip the transport handle down after transport.
The Hydraulic Power Unit is also equipped with transport lugs. The hydraulic unit can be transported with a crane suited for the
weight. Do not stand under the hydraulic unit during transport.
Ensure that the ground does not slope more than 20°. Set the Hydraulic Power Unit up at least 1 meter from buildings or other
flammable materials.
