background image

2

THE ORIGINAL LANGUAGE

OF THIS DOCUMENT IS FRENCH

INTRODUCTION

Portable Winch Co.

 wishes to thank you for purchasing a

Perimeter Wire Machine 600MH-Li

TM

. This manual was written to help

you make the best use of your new machine and to use it in the most
secure way.

PLEASE READ CAREFULLY BEFORE USE.

For any problems or questions, please contact an authorized Portable
Winch Co. dealer or contact us directly.

1

Safety guidelines

The  Perimeter  Wire  Machine  600MH-Li

TM

  is  designed  to  bury

electrical wires up to 6 mm in diameter at a depth of between 4 and
6 cm in grassy soil. The use of this machine implies serious risks of
injury,  property  damage  or  even  death.

Do  not  underestimate  its

potential danger.

1.1

Safety messages

Your safety and the safety of others are very important. You will
find important safety messages in this manual.

Please read them

carefully

.

These  security  messages  warn  you  of  potential  injuries  to  either
yourself or others. Each safety message is preceded by a warning
symbol.

1.2

Environmental protection

End-of-life electrical products must not be disposed of
with  household  waste.  Recycle  them  through  the
establishments available. Contact the local authorities
for more information on recycling conditions.

The  battery  contains  materials  which  are  harmful  to  you  and  the
environment.  It  must  be  removed  and  disposed  of  separately  at  a
collection point that accepts lithium-ion batteries.

1.3

Battery and charger

(Sold separately)

CHARGE  THE  BATTERY  IN  A  DRY  ENVIRONMENT
PROTECTED  FROM  THE  WEATHER.  DO  NOT  EXPOSE  THE

BATTERY OR CHARGER TO RAIN.

NEVER CHARGE THE BATTERY IN A DAMP ENVIRONMENT.
USE THE CHARGER AT TEMPERATURE BETWEEN 7 AND

40 ºC (45 AND 104 ºF). TO REDUCE THE RISKS OF ELECTRIC SHOCK, ONLY USE THE
CHARGER  PROVIDED  BY  THE  MANUFACTURER  TO  CHARGE  THE  BATTERY;  NEVER
STORE THE TOOL OUTDOORS. HANDLE THE CHARGER'S POWER CABLE WITH CARE.

NEVER CARRY THE CHARGER HOLDING ITS WIRE.

IF  THE  TOOL  IS  USED  INTENSIVELY  OR  UNDER  EXTREME
TEMPERATURES, BATTERY LEAKS MAY OCCUR. IF THE LIQUID

COMES INTO CONTACT WITH YOUR SKIN, RINSE THE AFFECTED AREA IMMEDIATELY
WITH SOAPY WATER. IN CASE OF CONTACT WITH YOUR EYES, RINSE WITH CLEAN
WATER  FOR  AT  LEAST  10  MINUTES  THEN  CONTACT  A  DOCTOR  IMMEDIATELY.
RESPECTING THIS RULE WILL REDUCE THE RISK OF SERIOUS INJURIES.

NEVER  UNPLUG  THE  CHARGER  FROM  THE  MAINS  BY
PULLING ON THE POWER CABLE.

NEVER CRUSH, DROP OR DAMAGE THE BATTERY. NEVER
USE A BATTERY OR CHARGER THAT HAS BEEN DROPPED,

CRUSHED,  RECEIVED  A  VIOLENT  SHOCK  OR  BEEN  DAMAGED  IN  ANY  WAY
WHATSOEVER. A DAMAGED BATTERY RISKS EXPLODING. DISPOSE OF A DAMAGED
BATTERY IMMEDIATELY USING AN APPROPRIATE METHOD.

WHEN  THE  BATTERY  IS  NOT  IN  USE,  KEEP  IT  AWAY  FROM
METAL  OBJECTS  SUCH  AS:  PAPER  CLIPS,  COINS,  KEYS,

NAILS, SCREWS AND OTHER SMALL METAL OBJECTS.

DO NOT USE THE CHARGER IF IT IS DAMAGED. REPLACE
THE CHARGER OR ITS CABLES IMMEDIATELY.

KEEP THE CHARGER AWAY FROM WATER, HEAT SOURCES
(RADIATORS,  HEATERS,  STOVES,  ETC),  FLAMES  AND

CHEMICAL PRODUCTS.

NEVER USE ANY WIRELESS DEVICE  IN THE PRESENCE OF
AN OPEN FLAME.

MAKE SURE THAT THE BATTERY IS SECURE IN THE CHARGER
BEFORE USING IT.

THE  BATTERY  WILL  WARM  UP  SLIGHTLY  DURING
CHARGING. THIS IS NORMAL AND DOES NOT INDICATE A

PROBLEM.

NEVER PLACE THE CHARGER IN A LOCATION EXPOSED TO
EXTREME TEMPERATURES (HOT OR COLD). IT WORKS BEST

AT ROOM TEMPERATURE.

WHEN  THE  BATTERY  IS  FULLY  CHARGED,  UNPLUG  THE
CHARGER FROM THE MAINS AND REMOVE THE BATTERY.

KEEP  THE  BATTERY  CLEAN,  DRY  AND  FREE  OF  OIL  AND
GREASE. ALWAYS USE A CLEAN CLOTH

FOR CLEANING.

NEVER  USE  BRAKE  FLUID,  PETROL,  OIL-BASED  PRODUCTS  OR  ANY  SOLVENT  TO
CLEAN THE BATTERY

.

1.3.1

Compatible Batteries

 (Sold separately)

80V AND 82V BATTERIES MADE BY GLOBE TOOLS CAN BE
USED IN YOUR PERIMETER WIRE MACHINE 600MH-LI

TM

.

SYMBOL

SIGNIFICATION

YOU WILL BE FATALLY OR SERIOUSLY
INJURED IF YOU DO NOT FOLLOW THESE
INSTRUCTIONS.

YOU COULD BE FATALLY OR SERIOUSLY
INJURED IF YOU DO NOT FOLLOW THESE
INSTRUCTIONS.

YOU COULD BE INJURED IF YOU DO
NOT FOLLOW THESE INSTRUCTIONS.

READ THE USER GUIDE.

EYE AND HEARING PROTECTION.

WEAR GLOVES

EN

Summary of Contents for 600MH-Li















Reviews: