Porsche Mobile Charger Connect, Owner'S Manual, Page: 33 / 646

Operation
31
e Activate function.
With the new login to the web application, demo
mode is deactivated again.
Change password
Changes the login password for the web application.
The initial password from the letter containing ac-
cess data is overwritten with the newly selected
password.
e Select Change and enter new password.
Set PIN
A PIN request serves to protect your charger and
prevents the unauthorized connection of a vehicle to
your charger.
1. Activate function.
2. Enter a 4-digit PIN and confirm.
3. Enter the PIN again and confirm it.
🡆
Activation of the PIN prompt is confirmed.
Enter this PIN to unlock the charger.
Activating guest PIN
In addition, a guest PIN can be created for another
user.
e The procedure is the same as for assigning a PIN
for device protection.
Information
The charger cannot be configured by the guest user.
Regulating power consumption
Activate sleep mode to save electricity. Sleep mode is
started as soon as the charging process is completed.
e Activate the function Standby mode .
The device requires some time to leave sleep
mode and restore operational readiness.
Information
After a prolonged period of non-use, the charger
switches automatically to standby mode. In a first
step, the brightness of the device display is reduced;
then the device display is switched off. Press the
Power button to restart.
Specifying the language and country
Field Explanation
Language Selection of the lan-
guage for the web ap-
plication.
Country The country of use. The
configuration settings
are country-specific. If
the specification devi-
ates from the actual
place of use, it is possi-
ble that some settings
will not be available.
Specifying date and time
Field Explanation
Date and time With a network con-
nection, the date and
time are automatically
applied.
Time zone: Can be se-
lected manually.
Field Explanation
Set time: Specify a
time, if the network
time is not available as
a reference.
Units
Select the parameters and units that are to be used
for the device.
Device display
This setting determines the brightness of the
charger‘s display.
Charging
Grid status
This setting is only visible for the Customer service
user. The information on the grid status presented
here is automatically detected by the device.
Display Explanation
Grid phases Number of supply cable
phases.
Cable type Type of vehicle charg-
ing cable. The cable
type delivers impor-
tant information for
the maximum charging
current setting.