Porsche Mobile Charger Connect, Owner'S Manual, Page: 31 / 646

Operation
29
Hotspot
Your end device can connect directly to the charger
using its integrated WiFi hotspot.
1. Select the function Set up hotspot .
2. In the settings, enter the network name and the
security code of the hotspot.
e For information on establishing a hotspot con-
nection,
g Refer to chapter "Opening the web
application" on page 27..
WiFi
Information
If the charger is already connected to the end device
via a hotspot, a connection to the WiFi network can-
not be established simultaneously. The hotspot must
be deactivated first.
1. Activate WiFi.
2. Select the option Connect to network .
3. Select the corresponding network from the list
and enter the Security key . Different network :
Select when the network should be invisible.
4. Select that the IP address should be automati-
cally assigned (recommended).
🡆
The IP address appears as soon as the con-
nection to the network is established.
In the list, the network status is displayed as
Connected .
Managing WiFi networks
Option Explanation
Different network
e
Select when your
network is an invis-
ible network.
Manage known net-
works
e Select Delete to
remove the saved
networks. The
charger is thereby
always in the rele-
vant network.
Disconnecting the network connection
1.
Select the network to which a connection exists.
2. Select Disconnect to disconnect the connection
to the WiFi network.
Configuring the network connection
1.
Select the network to which a connection exists.
2. Select Configure to change the settings for the
IPv4 address and the DNS server.
Information
For the network connection, a 2.4 GHz frequency
band is used. In the event of connection problems,
deactivate the 5 GHz frequency band on the network
router.
Powerline Communication
As an alternative to WiFi, your charger can be con-
nected to the home network via a PLC connection.
The existing power grid is used to establish a local
network for data transfer. The charger is registered
as a client in the PLC network.
To establish a connection, the charger and the PLC
modem can be connected to one another via the
pairing button. In this case, the charger is paired
automatically with the PLC modem. Another means
of establishing a connection is to enter the security
code of the charger on the PLC modem.
1. Activate Powerline Communication (PLC) .
2. Adding the charger to the PLC network:
–
Option 1: With the pairing button:
a. In the web application, select the option
Connect with PLC Push method .
Select b. Start pairing .
c. Press the pairing button on the PLC mo-
dem within 2 minutes to initiate the estab-
lishment of a connection.
d. Select the Connect button to confirm
pairing.
– Option 2: By entering the PLC security code:
a. Select the option Establish connection
with PLC security key . The security code is
displayed.
b. Enter the security code in the settings of
your PLC modem.
🡆
The charger is integrated in the PLC network
and a connection is established.