PORSCHE DESIGN Bike RS, Owner'S Manual

Page: 40 / 43

78 79
Recommended tightening torques *
Component Manufacturer Description Tightening torque
Frame Inlays dropouts 2 – 3 Nm
Bottle holder 2 – 3 Nm
Cable hanger, down tube 2 – 3 Nm
Rear derailleur Shimano XTR-RD-M980 Fastening screw 8 – 10 Nm
Gear cable hanger 6 – 7 Nm
Shift pulley 2,5 – 5 Nm
Front derailleur Shimano XTR-FD-M985 Mounting clamp 5 – 7 Nm
Gear cable hanger 6 – 7 Nm
Shifter lever Shimano XTR-SL-M980 Fastening screw handlebar clamp 3 Nm
Fastening screw handlebar clamp for the shifter lever 2,5 Nm
Brakes Magura MT8 Handlebar clamp 3 Nm
Brake calliper 10 Nm
Brake discs Magura Storm SL 6-bolt rotor, hub 6,2 Nm [ CB ]
Crank Shimano XTR-FC-M980 Adjusting screw left crank arm 0,7 – 1,5 Nm
Adjusting screw left crank arm 12 – 14 Nm
Pedals Crankbrothers Candy 3 10 – 15 Nm
VP 10 – 15 Nm
Cassette Shimano M771 Lockring 30 – 50 Nm
Stem Crankbrothers Cobalt 11 8 – 9 Nm
Seat clamp Crankbrothers Cobalt 11 12 Nm
Handles Crankbrothers Cobalt Clamp 3 Nm
Component Manufacturer Description Tightening torque
Frame Inlays dropout 2 – 3 Nm
Bottle holder 2 – 3 Nm
Cable hanger, down tube 2 – 3 Nm
Seat stay opening 4 – 6 Nm
Hub Alfine SG-S700 Axle nut 30 – 45 Nm
Crank FC-S500 Adjusting screw left crank arm 0,7 – 1,5 Nm
Adjusting screw left crank arm 12 – 15 Nm
Shifter lever SL-S700 Fastening screw handlebar clamp 5 Nm
Inside bearing Bearing cups 35 – 50 Nm
Eccentric bracket 12 – 15 Nm
Handles Topeak GX1 Clamp 3 – 4 Nm
Brakes Magura MT2/4 Handlebar clamp 3 Nm
Brake calliper 10 Nm
Brake disc Magura Storm Centerlock 40 Nm
Pedals VP 10 – 15 Nm
Stem Clamping screws - fork shaft 8 Nm
Clamping screws - handlebar clamp 6 Nm
Seat post Clamping screws 8 – 10 Nm
Kickstand Pletscher Fastening screws 10 – 12 Nm
Porsche Bike S Porsche Bike RS
* Please note that the tightening torques specified here may in some cases differ from manufacturer specifications. Always follow the manufacturer specifications.
For the necessary tightening torques, consult the enclosed owner’s manuals or manufacturer websites. Be absolutely sure to use carbon fitting lubricant when installing
carbon components. The tightening torques for carbon components are maximum tightening torques. Exceeding the tightening torques may damage or fracture
components. Use the Loctide screw lock, moderately tight.