background image

6

7

also observe the legal regulations of your country 
when using your bike off-road. We would also like  
to remind you to treat the environment with care and 
only travel on paved paths and roads.

Your bike should only be used in accordance with the 
“Proper Use” section of this manual, including the guid-
ance on overloading the bike. The warranty detailed at 
p.72 will not cover claims resulting from overloading the 
bike.

Familiarise yourself with the technical terms which  
are used throughout this owner’s manual and which 
appear on the overview page for your bike.

Please note that this owner’s manual does not explain 
how to assemble the bike from the individual parts or 
prepare a partially-assembled bike so that it is road 
worthy.

Store this owner’s manual in a safe place so that you 
can properly perform all functional checks at any time.

Parents should explain the contents of the instructions 
to children, who may not understand the owner’s 
manual.

Dear customer,

Congratulations on your purchase of the new  
Porsche Design Driver’s Selection bike. It is a high-end 
product. 

This owner’s manual provides information on the safe 
use and proper maintenance of your Porsche Bike. 
Please take time to carefully read through the owner’s 
manual before your first trip. It will advise you of the 
risks and hazards associated with improper use of the 
product.

It is not possible to describe all necessary work on 
your bike in detail in this manual. For this reason, we 
would like to ask you to use the enclosed documents 
or visit the websites of our component manufacturers.
Proper care and maintenance are important for your 
bike; they are essential for proper functioning and  
optimal performance.

This owner’s manual cannot train you in the skills of  
a bike mechanic. Furthermore, some of the work steps  
require special tools. The following therefore applies: 
Please consult the bike specialist of your choice or the 
Porsche Bike hotline for information on maintenance 
or repair work.

Because our bikes undergo continuous development, 
the shape, specification, configuration and engineering 
of your bike may not be as illustrated or described in 
this manual. Parts on the bike are sometimes optional 
or vary depending on legal requirements or on the 
country in which the bike is sold. Should your bike be 
fitted with any parts which are not described in this 
manual, the Porsche Centre who sold you the bike to 
you will be glad to provide information concerning  
correct operation and care of such parts. Because of 
different legal requirements in individual countries, the 
parts on your bike may vary slightly from that described 
in this manual. Porsche shall not be liable for any errors 
or omission within this manual.

The Porsche Bike is a virtually 100% pre-assembled 
bike. Nonetheless, we recommend that you check all 
functions before riding the bike.

Always use suitable protective clothing such as a  
helmet, gloves and glasses.

When using public roads, please check the regulations 
in your country and adapt your bike to meet these  
requirements. Please observe the traffic regulations 
that apply for road traffic and ride with care so as not 
to endanger yourself or other road users. You should 

Introduction

Safety notes in the owner’s manual

The following types of safety notes are used in this  
owner’s manual. 

PLEASE NOTE

Severe injury or death. 

Failure to observe safety 

notes in the category “Danger” may result in severe  
injury or death.

There is a risk of damage to property. 

Failure to 

observe safety notes in the category “Please Note” 
may result in damage to the bike.

Risk of injury or death. 

Failure to observe safety 

notes in the category “Warning” may result in severe 
injury or death.

Additional information, tips and notes are marked  
with the word “Information”. Please carefully read  
and observe the information provided.

Risk of moderate or minor injury. 

Failure to  

observe safety notes in the category “Caution” may 
result in moderate or minor injury.

This owner’s manual complies with the following  
standards:

–  EN 14764, 14765, 14766, 14872
–  CPSC 16 CFR 1512
–  AS/NZS 1927
–  BS 6102, Teil 1
–  JIS D 9301
–  GB 3565
–  ISO 4210, ISO 8098

We at Porsche wish you an enjoyable riding experience 
with your new bike.

DANGER

!

CAUTION

!

WARNING

!

INFORMATION

i

Summary of Contents for Bike RS












































Reviews: