manualshive.com logo in svg

Popcake PC-10R, Operating Manual

Share
Download
Popcake PC-10R Operating Manual Download Page 42

&

 $(

         

 

         

Figure 11 

8.      Input the belt code, as required, into the machine via the   

display panel menu option “Input Beltcode”. 

""!!' $
 #

 

Cleaning of the internal surfaces should only be undertaken 
after the machine is turned off and the machine has cooled 
down completely. It should be noted that there will be very few 
instances that require the hot plate assemblies to be removed 
however, if needed, removing and reinstalling the hot plates 
should be performed by an authorized Popcake service agent. 

Removing the hot plate assembly 

1 

Before carrying out this procedure, ensure the machine is 
turned off, the cooking plates have cooled down completely 
and the machine has been unplugged from the power source. 

2 

Open the front door of the machine. 

3 

Remove the Teflon belts as per procedure shown above (Belt 
changing procedure). 

4 

Unscrew the protruding lug nuts from the hot plate assembly 
and store temporarily in a safe place. There are two lug nuts 
located on each of the top and bottom hot plate assemblies. 

5 

Grasp the hot plate assembly at the front with both hands 
(one on each end, as close to the supporting rods as 
possible) and pull slowly towards you. The top and bottom 

Summary of Contents for PC-10R

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands