Pool Blaster Rush X21, Operator'S Manual

Page: 3 / 20

4
2
SAFETY AND USAGE SYMBOLS
The following symbols and meanings are intended to explain the levels of risk associated with this product:
Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.
SYMBOL SIGNAL MEANING
WARNING!
DANGER!
CAUTION!
The following symbols and meanings are intended help you operate the product better and safer. Please study them and learn
their meanings.
Indicates a potential personal injury hazard. Basic precautions should
always be followed when seeing this symbol.
Indicates by NO MEANS water should touch the indicated part with this
symbol. If not avoided, may result in minor or moderate injury.
Indicates to charge product for the 4 complete hours.
Green indicates battery has been fully charged.
Red indicates battery is accepting a charge.
Recycle batteries in accordance to local law.
Dispose any unwanted product in accordance to local law.
European Conformity.
Restriction of Hazardous Substances Compliance.
SYMBOL NAME EXPLANATION
SAFETY ALERT
DO NOT GET WET
CHARGE FOR
4 FULL HOURS
BATTERY
RECYCLE
DISPOSAL
BLINKING LIGHT
CE
RoHS
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
USAGE INFORMATION
21. Use this product only for its intended purpose as described in this manual. Use only Water Tech accessories and filters.
22. This product is not intended for commercial use.
23. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being damaged by transient over-voltage.
24. Never leave your cleaner in water when it is “OFF” or when it has run out of power.
25. Do not use your cleaner for pool openings; the cleaner is designed for routine maintenance of your pool or spa.
26. The cleaner is designed for underwater use in swimming pools or spas only. It is not an all purpose vacuum cleaner.
27. Submerge the cleaner in water immediately after turning the unit “ON” to prevent damage to the seal on the motor shaft. Failure to do so will shorten the life of
the water seal and / or void the warranty.
28. Avoid picking up sharp objects as they may damage the filter. Keep all openings on the cleaner free of debris which may reduce water flow.
29. Do not place the cleaner or charger on or near hot surfaces.
30. For best results use the charger in locations where temperatures are between 50˚ F / 10˚C and 100˚ F / 37.7˚ C.
31. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet.