Pontiac 2010 Vibe Owner'S Manual Download | Manualshive

Page: 259 / 318

background image

Dolly Towing
(Front-Wheel-Drive
Vehicles Only)

To tow the front-wheel-drive vehicle
using a dolly, follow these steps:

1. Put the front wheels on a dolly.

2. Move the shift lever to P (Park)

for an automatic transmission
or Neutral for a manual
transmission.

3. Set the parking brake.

4. Clamp the steering wheel in a

straight-ahead position with a
clamping device designed
for towing.

5. Remove the key from the

ignition.

6. Secure the vehicle to the dolly.

7. Release the parking brake.

Appearance Care

Exterior Care

Cleaning Exterior
Lamps/Lenses

Use only lukewarm or cold water,
a soft cloth and a car washing soap
to clean exterior lamps and lenses.
Follow instructions under “Washing
the Vehicle” later in this section.

Finish Care

Occasional waxing or mild polishing
of the vehicle by hand may be
necessary to remove residue from
the paint finish. Approved cleaning
products can be obtained from
your dealer/retailer.

Vehicle Care

9-75

«
...
257
258
259
260
261
...
»

Summary of Contents for 2010 Vibe































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Vibe

Brand: Pacbrake Pages: 9

Brand: JETBAG Pages: 44

Brand: Camcar Pages: 6

Brand: Westin Pages: 3

Brand: Vintage Air Pages: 28

Brand: Subaru Pages: 34

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

2008 MX-5 Miata

Brand: Mazda Pages: 400

Brand: Mercedes-Benz Pages: 358

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

2917 Nstallation

Brand: Edelbrock Pages: 1

Brand: ROADGEAR Pages: 2

Brand: Axxess Pages: 16

Brand: TATA Motors Pages: 308

Brand: Easee Pages: 21

Brand: Nav TV Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands