Pontiac 2010 Vibe Owner'S Manual Download

Page: 116 / 318

Operation

Playing the Radio

PWR VOL (Power/Volume): Press
to turn the radio on and off. Turn
the PWR VOL knob to adjust
the volume.

CLOCK: Press to adjust the time.

Setting the Clock

The date does not automatically
display. To see the date press the
CLOCK button while the radio is on.

The date display times out and goes
back to the normal radio and time
display. To adjust the time and date:

1. Turn the ignition key to

ACC/ACCESSORY or ON/RUN.

2. Press the PWR VOL (Power/

Volume) knob to turn on the radio.

3. Press the CLOCK button, and the

HR, MIN, MM, DD, YYYY (hour,
minute, month, day, and year)
categories display.

4. Press the button under the

category to be adjusted.

5. To increase the time or date,

do one of the following: turn
the TUNE ADJ (Tune/Adjust)
knob clockwise, press SEEK/
TRACK

, press FWD

(

(Forward), or continue to press
the button under the category to
be adjusted.

Radio with CD (MP3) shown, Radio with CD (Base) similar

6-2

Infotainment System

Summary of Contents for 2010 Vibe































































































































































































































































































































Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands

Pontiac 2010 Vibe, Owner'S Manual

Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands