Pontiac 2010 Vibe Owner'S Manual Download Page 86

Page: 86 / 318

Controls

Steering Wheel
Adjustment

A tilt and telescope wheel lets the
steering wheel position be adjusted.

The adjustment lever is located on
the left side of the steering column.

Pull the lever down to move the
steering wheel up or down and in
or out. Pull the lever up to lock the
steering wheel in place.

Do not adjust the tilt and telescope
lever while driving.

Steering Wheel Controls

For vehicles with audio steering
wheel controls some audio controls
can be adjusted at the steering
wheel. They include the following:

−

+ (Volume): Press to decrease

or increase the volume.

ª «

(Next/Previous): Press to

select the next or previous radio
station, CD track, or MP3 folder.

•

Press

to go to the next

or previous preset station.

•

Press and hold

until a

beep is heard to go to the next
or previous radio station. Only
stations with a strong signal will
be selected.

•

Press

to go to the next

or previous CD track.

•

Press and hold

until a

beep is heard to continuously go
to the next or previous track.

MODE: Press to turn the audio
system on or to select between AM,
FM, XM™ (if equipped), CD, or AUX.

Press and hold to turn the audio
system off.

4-4

Instruments and Controls

Summary of Contents for 2010 Vibe































































































































































































































































































































Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands

Pontiac 2010 Vibe, Owner'S Manual

Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands