Pontiac 2010 Vibe Owner'S Manual Download

Page: 220 / 318

4. Pull the bulb straight out of the

socket.

5. Push the new bulb straight in

until it clicks to secure.

6. Push the bulb socket in and turn

it clockwise to secure.

7. Reinstall the cover.

License Plate Lamp

To replace the license plate
lamp bulb:

1. Press the tabs in to disengage

them and remove the license
plate lamp assembly.

2. Turn the bulb socket

counterclockwise to remove it
from the license plate assembly.

3. Pull the bulb straight out of

the bulb socket.

4. Push the new bulb straight in the

bulb socket until it clicks.

5. Push the bulb socket straight into

the license plate assembly and
turn it clockwise to secure it.

6. Reinstall the license plate

assembly into its original location
making sure the tabs reengage.

9-36

Vehicle Care

Summary of Contents for 2010 Vibe































































































































































































































































































































Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands

Pontiac 2010 Vibe, Owner'S Manual

Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands