Pontiac 2010 Vibe Owner'S Manual Download Page 85

Page: 85 / 318

The main components of the
instrument panel are the following:

A. Power Mirrors on page 1-10.

B. Air Vents on page 7-4.

C. Turn and Lane-Change Signals

on page 5-3.

D. Instrument Cluster on page 4-9.

E. Windshield Wiper/Washer on

page 4-5.

F. Passenger Airbag Status

Indicator on page 4-13.
Passenger Sensing System
on page 2-29. Security Light
on page 4-20.

G. Hazard Warning Flashers on

page 5-3.

H. AM-FM Radio on page 6-4.

I. Traction Control System (TCS) on

page 8-33.

J. Anti-Theft Alarm System on

page 1-7.

K. Front Storage on page 3-2.

L. Hood on page 9-5.

M. Steering Wheel Controls on

page 4-4.

N. Steering Wheel Adjustment on

page 4-4.

O. Horn on page 4-5.

P. Cruise Control on page 8-36

(If Equipped).

Q. Ignition Positions on page 8-16.

R. Tire Pressure Reset Button

(Out of View). See Tire Pressure
Monitor Operation on page 9-52.

S. Power Outlet 115 Volt

Alternating On/Off Button.
See Power Outlets (Accessory
Power Outlets) on page 4-6 or
Power Outlets (115 Volt
Alternating Current) on page 4-7.

T. Cigarette Lighter (If Equipped)

or Accessory Power Outlet.
Cigarette Lighter on page 4-8 or
Power Outlets (Accessory Power
Outlets) on page 4-6 or Power
Outlets (115 Volt Alternating
Current) on page 4-7.

U. Shift Lever. Automatic

Transmission (Four Speed
Automatic) on page 8-24 or
Automatic Transmission (Five
Speed Automatic) on page 8-27
or Manual Transmission on
page 8-29.

V. Power Outlets (Accessory Power

Outlets) on page 4-6 or Power
Outlets (115 Volt Alternating
Current) on page 4-7.

W. Climate Control Systems on

page 7-1.

X. Load Rails and Hooks on

page 3-4.

Y. Glove Box on page 3-1.

Instruments and Controls

4-3

Summary of Contents for 2010 Vibe































































































































































































































































































































Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands

Pontiac 2010 Vibe, Owner'S Manual

Search results

Summary of Contents for 2010 Vibe

Reviews:

Related manuals for 2010 Vibe

Brands by name

Popular brands