Pontiac 2000 Grand Prix Owner'S Manual Download Page 306

Page: 306 / 376

6-39

2. Remove the two bolts from the top of the

headlamp assembly.

3. Remove the headlamp assembly from the vehicle.

Be careful to avoid scratching or chipping the paint
on the vehicle while removing it.

4. Turn the front sidemarker bulb socket a quarter turn

counterclockwise to remove.

5. Remove the bulb from the socket.

6. Place the new bulb into the socket.

7. Turn the bulb socket a quarter turn clockwise to

reinstall it.

8. Carefully reinstall the headlamp assembly. Be

careful to avoid scratching or chipping the paint on
the vehicle.

9. Reinstall the two bolts on the top of the

headlamp assembly.

10. Close the hood.

Summary of Contents for 2000 Grand Prix
























































































































































































































































































































































































Search results

Summary of Contents for 2000 Grand Prix

Reviews:

Related manuals for 2000 Grand Prix

Brands by name

Popular brands

Pontiac 2000 Grand Prix, Owner'S Manual

Search results

Summary of Contents for 2000 Grand Prix

Reviews:

Related manuals for 2000 Grand Prix

Brands by name

Popular brands