manualshive.com logo in svg

Pontiac 2000 Grand Prix, Owner'S Manual

Share
Download
Pontiac 2000 Grand Prix Owner'S Manual Download Page 143

2-75

D If the Enhanced Traction System warning light

comes on and stays on for an extended period of
time when the system is turned on, your vehicle
needs service. Adjust your driving accordingly.

D If the traction control system is affected by an

engine

-

related problem, the system will turn off and

the warning light will come on.

When this warning light is on, the system will not limit
wheel spin. Adjust your driving accordingly.

Low Traction Light

If you have the
Enhanced Traction
System or the Traction
Control System, this
light will also come on
when the system is
limiting wheel spin.

You may feel or hear the system working, but this is
normal. Slippery road conditions may exist if the low
traction light comes on, so adjust your driving
accordingly. The light will stay on for a few seconds
after the Enhanced Traction System or the Traction
Control System stops limiting wheel spin. See
“Enhanced Traction System” or “Traction Control
System” in the Index.

The low traction light also comes on briefly when you
turn the ignition key to RUN. If the light doesn’t come
on then, have it fixed so it will be there to tell you when
the Traction Control System or Enhanced Traction
System is active.

Summary of Contents for 2000 Grand Prix

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands