POMCube iCAN NetZero Plus, User Manual

Page: 41 / 48

1
connection.
Reset Network
Long press RESET button for 4 seconds. Re-configure the network following the
instructions in the app.
Troubleshooting
In any cases of device failure, please check alarms on APP and proceed as
instructed accordingly. If APP fails to connect to the device, check the status of
indicators and possible reasons and solutions as follows:
(1)
The Network Indicator on Universal PCS is always solid red.
The energy management
unit may be crashed or
damaged. Press the ON/OFF button to reboot the
Universal PCS. If it is not recovered, shut it
down and contact us.
(2)
The Network Indicator on Universal PCS is always blinking red.
The Wi-Fi is not 2.4G. Select a 2.4G Wi-Fi for Wi-Fi connection.
The indicator was not
blinking red before
configuring the network. Make sure the indicator is blinking red before
configuring the network. Try to re-configure
the network.
(3)
The Network Indicator on Universal PCS is always blinking green.
The router may not work
properly. Check the router status. Reset the router if
necessary.
The Wi-Fi password put in
was incorrect. Try to Re-configure the network.
Wi-Fi was changed. Re-configure the network.
Ethernet cable disconnected
(if applicable) Double check and reconnect Ethernet cable