POMCube iCAN NetZero Plus, User Manual

Page: 26 / 48

22
(5)
If Universal PCS hybrid inverter is installed separately from battery system,
use the bracket for Universal PCS: install the bracket on the wall with M6x50
tapping screws, hang Universal PCS on the bracket and fasten it with M4x16
screws.
NOTE: Drill properly into a concrete wall, then screw with M6x50 tapping screws.
CAUTION: Dust proof is required during drilling.
(6)
Install Universal PCS independently from battery system (if applicable).
Universal PCS installed separately
(7)
If the battery cabinet is installed separately from Universal PCS, the bracket
for battery system is required. Install the bracket on the wall with M6x50
tapping screws. Ensure the distance between the bracket and floor is as
specified in the figure below. Hang the empty cabinet itself on the bracket.
NOTE: Drill properly into a concrete wall, then screw with M6x50 tapping screws.
CAUTION: Dust proof is required during drilling.
CAUTION
：
Make sure the cabinet is standing steadily on the floor. The
bracket is only for keeping the battery system from dumping, instead of
bearing the load.