POMCube iCAN Mini 3500, User Manual

Page: 7 / 35

6
○
1
CAN communication port
○
11
ON / OFF
○
2
USB communication port
○
12
Fan air vent
○
3
RS485 communication port
○
13
LCD screen
○
4
Stem node ports
○
14
Buttons
○
5
In MPPT charge fan
○
15
Instantaneous utility
overcurrent protection
○
6
Battery input wire terminal
○
16
Ground connection screw
hole
○
7
Solar input wire terminal
○
17
Battery switch
○
8
AC input wire terminal
○
18
Solar switch
○
9
AC load output wire terminal
○
19
Switches of AC input and
output
○
10
Utility charge fan
2. Installation Instructions
2.1 Installation precautions
Please read this manual carefully before installation to be clear about the installation steps.

Please be very careful when installing the battery. When installing lead-acid battery, protective
glasses should be worn. Once contacting the battery acid, please rinse it with clean water in
time.

Avoid placing metallic objects near the battery in order to prevent the battery from short
circuiting.

Acid gas may be generated when the battery is being charged, so good ventilation in
surrounding environment should be ensured.

When installing the cabinet, it is sure to leave enough space in the perimeter of the iCAN Mini
for heat radiation. Do not install the iCAN Mini and lead-acid battery in the same cabinet in
order to avoid acid gas generated by the working battery corroding the iCAN Mini.

Only charge the battery types that are in conformity with this iCAN Mini.

Bad connection points and corroded wires may cause extreme heat to melt the wire insulation
layer, burn the surrounding materials, and even cause fire, so it is sure to tighten the
connection points, and it is best to secure the wires with the cable ties in order to avoid the
loose connection points caused by shaking the wires when moving and applying.

The system connection wire is selected in accordance with a current density of not more than
5A/mm
2
.

Avoid direct sunlight and rainwater infiltration when the machine is installed outdoor.