POMCube iCAN Mini 3500, User Manual

Page: 2 / 35

Important Safety Instructions
Please keep this manual for future reference.
This manual contains all safety, installation and operating instructions for iCAN Mini - an integration of solar charge
inverter and controller.
Please carefully read all instructions and precautions in the manual before installation and usage.

There is a non-safety voltage inside the iCAN Mini. In order to avoid physical injury, users shall not disassemble
it themselves. If any repair is needed, please contact professional maintenance personnel in our company.

Please do not place the iCAN Mini in the places where the children can touch.

Please do not install the integrated machine in harsh environment where is damp, greasy, inflammable and
explosive, or dust is excessively accumulated.

The utility input and AC output are high voltage, so please do not touch the wire connection points.

When the iCAN Mini is working, the temperature of the machine case will be very high, please do not touch it.

When iCAN Mini is working, please do not open the terminal protection cover.

It is recommended to install appropriate fuses or circuit breaker on the outside of the iCAN Mini.

Please be sure to disconnect the fuses or circuit breaker near the PV array, utility power and battery terminals
before installing and adjusting the connected wire of the iCAN Mini.

After installation, check if all wire connection is tight in order to avoid the risk of heat accumulation due to bad
connection.

The iCAN Mini is off-grid type. It is strictly forbidden to be connected to the grid, or else the machine will be
damaged.

At present, it is allowed that the iCAN Mini only work singly. It is strictly forbidden for multiple machines to
output in parallel or in series, or else the iCAN Mini will be damaged.