Polytec TMS-350 TopMap In.Line, Hardware Manual

Page: 7 / 59

1-3
1 Safety Information
1.2.4 Ambient Conditions
Operation and
storage
Operate the instrument in the ambient conditions as specified in the technical
specifications.
ATTENTION!
Optics impaired by condensation!
If the instrument is started up in a warm environment after being stored in a
cold environment, this can cause condensation which impairs the optical
components.
» Wait with the start-up of the device until the temperature of the device
adapted to the ambient temperature.
1.2.5 Transport
CAUTION!
Risk of injury caused by heavy system components!
There is the risk of injury to hands and feet when carrying and lifting heavy
system components.
» Only lift system components in pairs or using a suitable lifting device.
» Wear safety shoes.
» Wear protective gloves.
1.2.6 Personal Protective Equipment
1.2.7 Cleaning
WARNING!
Electric shock caused by penetrating moisture!
If the instrument is under voltage, moisture penetrating can cause an electric
shock.
» Always disconnect the mains plug before you clean the device.
ATTENTION!
Damage to the housing surfaces caused by unsuitable cleaning agents!
» Do not use any aggressive solvents such as acetone or ethanol.
Source of danger Personal protective equipment
Heavy parts (transport, setup) Safety shoes
Component Cleaning agent
Exit window (dust) Soft, lint-free cloth; bellows
Exit window (grease) e.g. ethanol or isopropanol
Housing surfaces Mild detergent or disinfectant solutions