Polytec TMS-350 TopMap In.Line, Hardware Manual

Page: 6 / 59

1-2
1 Safety Information
1.2 General Safety Information
1.2.1 Operating the Instrument Safely
Faultless and safe operation of the instrument presume proper transport and
proper storage, installation and assembly as well as careful operation of the
instrument. In addition, it is imperative for the safe operation of the device that
you pay attention to the safety and warning notices which are listed in this
manual. When assembling, installing and operating the instrument, make sure
that you adhere to the safety and accident prevention regulations applicable
to the respective application.
1.2.2 Intended Use
The instrument is intended for use in a laboratory. It may only be operated
within the limits set in the technical specifications. Tampering with the
instruments in any way is not necessary when using the equipment as
intended and will invalidate the warranty.
Any use other than the one described here and in S
ECTION
2.1 is not
permitted.
The instruments are designed in accordance with good engineering practice
to meet state-of-the-art safety requirements, have been tested, and left the
factory in a condition in which they are safe to operate.
1.2.3 User Qualification
Task Qualification
Assembly, adjustment, operation This instrument may only be used by qualified personnel
who are familiar with electrical measuring instruments and
have been trained to use the instrument.
Repair and maintenance This instrument may only be maintained by the
manufacturer or by qualified persons who have been
authorized by the manufacturer.
Exchange / Installation of
subassemblies Subassemblies may only be exchanged or installed by
authorized service personnel from Polytec.