Polytec PSV 300, Hardware Manual

Page: 56 / 105

   
                           
5 5.. Re Repe pea at t st step eps s 3 3 and and 4 4 until all desired scan points are defined. until all desired scan points are defined.
To delete defined scan points, select the GRID mode using the MODE key on To delete defined scan points, select the GRID mode using the MODE key on
the hand set (L the hand set (L
ED ED
GRID is lit up). The TEACH key now functions as DEL key GRID is lit up). The TEACH key now functions as DEL key
(for deleting). (for deleting).
6. 6. Usin Using the arro g the arrow key w keys, move t s, move the lase he laser beam for r beam forward wards or back s or backwards t wards to the o the
scan point you want to delete. scan point you want to delete.
7. 7. Pres Press the D s the DEL ke EL key and th y and the selec e selected sc ted scan poin an point is dele t is deleted. ted.
8 8.. Re Repe pea at t st step eps s 6 6 and and 7 7 until all desired scan points are deleted. until all desired scan points are deleted.
 
When the PSV is controlled via the software (L When the PSV is controlled via the software (L
ED ED
s REMOTE and LLO are lit s REMOTE and LLO are lit
up), you can use up), you can use the software to define and delete the software to define and delete scan points, please refer to scan points, please refer to
your software manual. your software manual.
   
 
When the PSV is controlled via the software (L When the PSV is controlled via the software (L
ED ED
s REMOTE and LLO are lit s REMOTE and LLO are lit
up), all settings are adjusted via up), all settings are adjusted via the software, refer to your software manual. the software, refer to your software manual.
In this case the In this case the keys FUNCTION and SETTIN keys FUNCTION and SETTING on the G on the front of the controller front of the controller
do not have a function. do not have a function.
You will find information on setting the measurement range and the filters in You will find information on setting the measurement range and the filters in
sec
sec ti ti on on 4.2 4.2 ..
 
When the controller is operated without the When the controller is operated without the software software, you can , you can set the set the
measurement range and the filters via a menu on its display using the keys measurement range and the filters via a menu on its display using the keys
FUNCTION and SETTING (refer to FUNCTION and SETTING (refer to sec sec tio tio n n 5.1 5.1 2 2 ). ).
      
 
Overranging is indicated in the software. Please refer to your Overranging is indicated in the software. Please refer to your software software
manual. manual.
  If the L If the L
ED ED
OVER on the front of the controller is lit up continuously, it means OVER on the front of the controller is lit up continuously, it means
that the measurement range set is that the measurement range set is being exceeded. In this case the being exceeded. In this case the next next
highest measure highest measurement range must be selected. Y ment range must be selected. You will find further informa ou will find further information tion
on setting the measurement range in on setting the measurement range in sec sec tio tio n n 4.2 4.2 .1 .1 ..
 
To get a 3D view style of the data, you have to define connections in the software. Please To get a 3D view style of the data, you have to define connections in the software. Please
refer to your software manual. refer to your software manual.
 
If you press the DEL key for more than approximately one second, the scan points will be If you press the DEL key for more than approximately one second, the scan points will be
deleted one after the other! deleted one after the other!