Polytec PSV 300, Hardware Manual

Page: 37 / 105

       
                
 


⇔ ⇔
   


20. 20. If required, connect t If required, connect the hand set PSV he hand set PSV-Z-051 to the 12-pin circular jack -Z-051 to the 12-pin circular jack
REMOTE CONTROL on the front of the scanning head. REMOTE CONTROL on the front of the scanning head.
   


21. 21. If appli If applicable cable, plug the , plug the
   
cable from the connector box of the cable from the connector box of the
optional pan-tilt stage into the 4-pin circular jack on optional pan-tilt stage into the 4-pin circular jack on the underside of the the underside of the
scanning head. scanning head.
22. 22. Pl Plug th ug the e   cable from the cable from the connector box of the pan-tilt stage into connector box of the pan-tilt stage into
the circular jack on the circular jack on the pan-tilt stage. the pan-tilt stage.
 


23. 23. Plug a mains cable into the back of the workstati Plug a mains cable into the back of the workstation and into a wall socket on and into a wall socket
providing protective grounding. providing protective grounding.
24. 24. Plug a mains cable into the back of the junc Plug a mains cable into the back of the junction box and into a wall socket tion box and into a wall socket
providing protective grounding. providing protective grounding.
25. 25. Plug a mains cable into the back of the contro Plug a mains cable into the back of the controller and into a wall socket ller and into a wall socket
providing protective grounding. providing protective grounding.
26. 26. If applicable, plug a mains cab If applicable, plug a mains cable into the connector box of the pan-tilt le into the connector box of the pan-tilt
stage and into a stage and into a wall socket providing protective grounding. wall socket providing protective grounding.
The PSV is now completely installed. Carry out a functional test as described The PSV is now completely installed. Carry out a functional test as described
in
in se se ct ct ion ion 3.5 3.5 ..
 
  check the setting of the voltage selectors on the back of the workstation and the check the setting of the voltage selectors on the back of the workstation and the
controller as well as the rating of the fuses on the back of the controller and the junction box controller as well as the rating of the fuses on the back of the controller and the junction box
  connecting to the mains! connecting to the mains!
 
 
check the setting of the voltage selector on the connector box of the pan-tilt stage check the setting of the voltage selector on the connector box of the pan-tilt stage
  connecting to the mains! connecting to the mains!