Polytec PSV 300, Hardware Manual

Page: 27 / 105

       
                
   
     
 


The scanning head is mounted on either a tripod with fluid stage (OFV-S2) or The scanning head is mounted on either a tripod with fluid stage (OFV-S2) or
a heavy duty tripod with motorized pan-tilt stage (optional PSV-Z-017). The
a heavy duty tripod with motorized pan-tilt stage (optional PSV-Z-017). The
heavy-duty tripod can also be mounted on
heavy-duty tripod can also be mounted on a trolley (optional). The scanning a trolley (optional). The scanning
head mounted on the fluid stage and on the head mounted on the fluid stage and on the tripod is shown in tripod is shown in fig fig ure ure 3.1 3.1 1 1 ..
Before attempting to mount the scanning head, all locking mechanisms of the Before attempting to mount the scanning head, all locking mechanisms of the
trolley and the tripod, particularly screws, should be checked to
trolley and the tripod, particularly screws, should be checked to make sure make sure
they are tight. A loose screw may cause the stand to be unstable and possibly they are tight. A loose screw may cause the stand to be unstable and possibly
collapse.
collapse.
Figure 3.11: Scanning head mounted on the fluid stage and on the tripod Figure 3.11: Scanning head mounted on the fluid stage and on the tripod
 
It is best to carry out the following assembly when someone is there to help you! It is best to carry out the following assembly when someone is there to help you!