Polytec PSV 300, Hardware Manual

Page: 30 / 105

       
                 
9. 9. Fix th Fix the pan-t e pan-tilt sta ilt stage on the co ge on the connec nnector box us tor box using the 3 Al ing the 3 Allen sc len screws rews
M8x16 and the washers. M8x16 and the washers.
10. 10. Then mount the scanning head with it Then mount the scanning head with its mounting plate on the pan-til s mounting plate on the pan-tiltt
stage using the 2 Allen screws M stage using the 2 Allen screws M6 6 x x 16 and the washers as shown in 16 and the washers as shown in
fig fig ure ure 3.1 3.1 4 4 ..
1 11. 1. Keep the assembly inst Keep the assembly instructions for the tripod and pan-t ructions for the tripod and pan-tilt stage in a safe ilt stage in a safe
place. place.
For cabling the pan-tilt stage, refer to For cabling the pan-tilt stage, refer to sec sec tio tio n n 3.4 3.4 .2 .2 ..
 
Make sure that the pan-tilt stage is correctly aligned to the connector box! The FRONT Make sure that the pan-tilt stage is correctly aligned to the connector box! The FRONT
labeled sides have to be mounted in the same direction. labeled sides have to be mounted in the same direction.
 
Make sure that the FRONT labeled sides of the components are mounted in the direction of Make sure that the FRONT labeled sides of the components are mounted in the direction of
the front panel of the scanning head! the front panel of the scanning head!
Figure 3.14: Mounting the scanning head on the pan-tilt stage Figure 3.14: Mounting the scanning head on the pan-tilt stage
 
   
       
   
               
   
   