Polytec PSV 300, Hardware Manual

Page: 61 / 105

   
                         
     
Simple tests are described in the following which you can carry out Simple tests are described in the following which you can carry out yourself in yourself in
the case of the case of malfunctio malfunction. In the n. In the case of more difficult faults in individual case of more difficult faults in individual
functions, please contact our service personnel. The tests described here are functions, please contact our service personnel. The tests described here are
not meant to lead you to carry out
not meant to lead you to carry out maintenance work yoursel maintenance work yourself but to provide f but to provide
our service personnel with information which is as our service personnel with information which is as accurate as possible. accurate as possible.
Testing the PSV is limited to such tests in which the housing does not have to Testing the PSV is limited to such tests in which the housing does not have to
be opened. Opening the housing
be opened. Opening the housing without authorization invalidat without authorization invalidates the es the
warranty. warranty.
If required, please contact our service department. Based on your fault If required, please contact our service department. Based on your fault
description, further procedure will be
description, further procedure will be determined. determined.
If the PSV has to be sent back for repair, please use the original packaging If the PSV has to be sent back for repair, please use the original packaging
and enclose an
and enclose an exact description of the fault. exact description of the fault.
      
If any system component of the PSV does not function properly, please first If any system component of the PSV does not function properly, please first
check the following:
check the following:
1. 1. Is t Is the P he PSV c SV correc orrectly c tly cabled abled as de as descri scribed i bed in n sec sec tio tio n n 3.4 3.4 .2 .2 ? ?
2. 2. Are th Are there onl ere only orig y original R inal RS-232 c S-232 cables ables from P from Polyt olytec use ec used (1:1 w d (1:1 wired)? ired)?
3. 3. Is t Is the tr he trans ansfer r fer rate s ate set to 9600 B et to 9600 Bau aud (re d (refe fer to r to se se cti cti on on 5.1 5.1 2.3 2.3 )) ? ?
4. 4. If yo If you cont u control the P rol the PSV us SV using th ing the soft e software v ware via the I ia the IEEE EEE-488/ -488/ GPI GPIB B
interface: Is the IEE interface: Is the IEEE-488 E-488 // GPIB address of the cont GPIB address of the controller set to 5 (refer to roller set to 5 (refer to
se se cti cti on on 5.1 5.1 2. 2. 3 3 )) ? ?
Check whether the data acquisition board is correctly installed. To do so, Check whether the data acquisition board is correctly installed. To do so,
proceed as follows:
proceed as follows:
5. 5. Doub Double-cl le-click the i ick the icon Mea con Measurem surement& ent&Auto Automati mation on the de on on the deskto sktop. p.
6. 6. Chan Change in ge into th to the fol e folder D der Devic evices a es and In nd Interf terfaces. aces.
                       
            
            
          
          