Please note that the “Please Call Me” will only work if the correct network is selected in the Settings
tab of the configuration software.
➢
“Log Status to Server”
,
it will send a status message via GPRS to our server to update the status of the
Micro Commander on the AirDrive platform. (Log onto
Airdrive
to find out more)
The recipient number can be defined in one of the following six ways:
•
Not Used
•
Last voice call number
•
Last sms number
•
Reply to originating number (only available with IF conditions 8.1.1 and 8.1.2)
•
a predefined number from the “numbers” list
•
a new number
The user also has the option to insert special characters into the string to create more complex messages.
(See section 10)
8.2.3. THEN Place Voice Call
A statement containing this Action, will place a voice call to each of up to 6 selected recipients. The user
is able to specify the time to ring, the number of calls to make as well as the time between calls.
The recipient number can be defined in one of the following five ways:
•
Not Used
•
Last voice call number
•
Last sms number
•
A predefined number from the “numbers” list
•
A new number
Please Note:
If a call is answered, then hung up, subsequent calls for this event will be cancelled.
8.2.4. THEN Enable/Disable Statements
A statement containing this Action, will enable or disable up to a maximum of 8 selected behaviour
statements such that it will be allowed to trigger if it is enabled and not be allowed to trigger if it is
disabled.
8.2.5. THEN Enable/Disable ALL SMS Sending
A statement containing this Action, will enable or disable ALL SMSes, meaning that if it is enabled it will
allow the sending of any SMS messages and if it is disabled it will inhibit the sending of any SMS messages.
8.2.6. THEN Set Multiple Outputs to Pattern
A statement containing this Action, will change the status of multiple outputs to a certain state.
8.2.7. THEN Reset device
A statement containing this Action, will reset the Micro Commander.
© Polygon Technologies. All rights reserved
Page 27
